Nashville, TN - Thursday July 28, 2022

Nashville, TN

Event Date
Thursday July 28, 2022

7:30 am - 5:30 pm

Available Credits

Up to 8 AIA HSW/LU CE Hour(s)
Up to 4 GBCI General Hour
Up to 1 RCEP PDH(s) for Engineers
Maggiano's Little Italy
3106 West End Ave
Nashville, TN 37203
Registration Price

$65.00

Terms
Early Bird Discount! $30.00 off if purchased before Jul 14, 2022

JOIN US IN YOUR CITY • REGISTER BELOW • ATTENDANCE REPORTED ON A PER-PRESENTATION BASIS

Founded in 1954 by Emmanuel Mullet, Wayne Dalton was built on a dedication to ingenuity and customer service. As our business grew, so did our commitment to expanding our product lines, leading the company to become one of the largest door manufacturers in the United States. Since the beginning, we’ve remained committed to being the garage door partner whose innovation drives dealer productivity and provides industry-leading garage door solutions. In an effort to continue this innovation, Wa...

Event Agenda

Thursday, July 28, 2022

7:30 am

8:00 am

Don't Wait: A Canopy Prep Timeline
Presented By Steve Standridge
1 AIA HSW/LU CE Hour(s)

Canopy systems are important additions to the building envelope, as well as providing a beautiful, unique aesthetic. Additionally, canopy systems require proper planning, knowledge, and a well-kept timeline. Architectural choices should drive the project, and as a result, the cost.

Learning Objectives:
  1. Discuss canopy design elements, as well as attachment and structural needs in order to take control of the process and drive cost.
  2. Explain how proper canopy design determines the green building benefits such as reduction in energy usage, costs, and building emissions while promoting health and wellness.
  3. Address specific challenges in form and function and how to deal with those challenges in the early stages to avoid late-stage revisions and higher project costs
  4. Discuss when to use differing attachments, and how those choices affect the safety and structure of the wall surface as well as the environmental benefits of a canopy system.

9:10 am

Introduction to Existing Building Retrofits
Sponsored By PROSOCO
Presented By Dave Pennington
1 AIA HSW/LU CE Hour(s)
1 GBCI General Hour

This program introduces building retrofits as a method to achieve green building standards by adapting existing structures. While a building retrofit may have several types of interventions, participants will learn how effective air sealing will improve overall occupant comfort, health, and safety.

Learning Objectives:
  1. Define building retrofits and identify goals of interventions.
  2. Illustrate how effective air sealing can help achieve goals of retrofit.
  3. Identify common sources of air leakage.
  4. Explain how to implement air sealing in a building retrofit.

10:20 am

Preventing Floorcovering Failures Through Integrated Design
Presented By Bill Roper
1 AIA HSW/LU CE Hour(s)

Finish elements such as the floorcovering system have a great impact on the final aesthetics of a structure. Floorcovering specification sections often do not address the compatibility of the floorcovering system with the type of application and intended service use.

Learning Objectives:
  1. Identify the documents that clearly define proper installation of the floorcovering system.
  2. Recognize the impact of misspecification of floorcovering systems.
  3. Evaluate the impact of improper floorcovering systems installation.
  4. Specify appropriate ambient site conditions to avoid floorcovering system installation failure.
  5. Avoid floorcovering systems failures through improper/outdated design specifications.
ISE Logik Industries

11:30 am

A Clean Slate: Hygienic Public Restroom Design with WELL v.2
Sponsored By World Dryer
Presented By Scott Kerman
1 AIA HSW/LU CE Hour(s)
1 GBCI General Hour

Now more than ever, public restrooms must be clean and comfortable for all users. However, exactly what that looks like has been up for debate. Join us in this one-hour course as we make the case for multi-stall public restrooms that address users’ concerns of privacy and hygiene through partitions, fixtures, hand dryers, and beyond.

Learning Objectives:
  1. Identify emerging trends in public restroom design and how multi-stall restrooms address users’ concerns of privacy and hygiene
  2. Evaluate partition materials and types to ensure public restroom stalls are designed to be safe, sustainable, and accessible for all users
  3. Illustrate how touchless restroom fixtures promote sanitation and water efficiency
  4. Demonstrate how warm air hand dryers equipped with HEPA filters can encourage proper hand hygiene and sustainability
World Dryer

12:30 pm

1:00 pm

Why Did the Waterproofing Fail?
Sponsored By Noble Company
Presented By James Medina
1 AIA HSW/LU CE Hour(s)
1 GBCI General Hour

This course evaluates the reasons that lead to failures of waterproofing installations. It examines product attributes that lead to successful installations and identifies the ways to identify necessary characteristics. Also compares installation methods and identifies ways to specify successful installations.

Learning Objectives:
  1. Review common waterproofing products, installation methods, and building code compliance.
  2. Understand the relationship of movement in the surface and substrate to waterproofing.
  3. Understand reasons for failures in waterproofing installations under tile and the relationship of failed waterproofing to durability and Sustainable Design.
  4. Understand permeation and its impact on creating suitable water and vapor barriers for tile installations and the relationship of permeation to Indoor Air Quality.
Noble Company

2:10 pm

Improving the Performance of Finished Concrete Flooring
Sponsored By PROSOCO
Presented By Randy Niederer
1 AIA HSW/LU CE Hour(s)
1 GBCI General Hour

This overview of concrete floor basics shows participants how to get the most from finished concrete floors. Along the way, it discusses levels of finished concrete flooring not commonly known. The program shows how to protect and maintain finished concrete flooring.

Learning Objectives:
  1. Compare the waste generation characteristics of lithium-silicate hardener/densifiers to older potassium and sodium-silicate hardeners/densifiers.
  2. Estimate the expected service life of a finished concrete floor and rate it for sustainability on a scale of "good-fair-poor."
  3. List two ways finished concrete floors "perform" that contribute to sustainability.
  4. Explain how regular maintenance contributes to sustainability of polished concrete floors.

3:20 pm

High Performance Door Solutions for Food & Beverage Manufacturing
Presented By John Scara
1 AIA HSW/LU CE Hour(s)
1 RCEP PDH(s) for Engineers

In food and beverage applications, conditioned air control and productivity are critical. Join us in this one-hour course as we discuss high performance door solutions that address the unique needs of food and beverage manufacturing, processing, storage, and distribution facilities from dock to freezer and everything in between.

Learning Objectives:
  1. Explain how high performance doors can promote safety, efficiency, and productivity in food and beverage manufacturing
  2. Illustrate key zones in a food and beverage manufacturing facility that benefit from high performance doors and evaluate different freezer, cooler, and warehouse solutions
  3. Recognize unique environmental, safety, and electrical conditions that impact the performance of high performance door systems and identify regulations and standards that address these issues
  4. Discuss how to effectively specify high performance doors in food and beverage applications through case studies
Overhead Door Corporation

4:30 pm

Architectural Fire Rated Joint Assemblies
Sponsored By CEMCO
Presented By Don Pilz
1 AIA HSW/LU CE Hour(s)

In this one-hour course, design professionals will gain knowledge of head-of-wall, bottom-of-wall and wall-to-wall assemblies, as well as the respective UL standards for approval, It will discuss different joint treatment types and the components involved with each application.

Learning Objectives:
  1. Identify a variety of wall-to-wall, bottom-of-wall, and head-of-wall joints, including their UL assemblies and ratings.
  2. Evaluate different joint treatment types for their advantages and disadvantages, particularly in regard to their durability, cost, and safety.
  3. Discuss International Building Code that relates to fire resistant joint systems and firestopping that protects occupants in the event of a fire.
  4. Apply knowledge of IBC standards to specify, install, and operate fire resistance joints to ensure occupant safety.
CEMCO
COVID-19 Protocols

Just like you, we are excited for the opportunity to resume live events. That being said, the health and safety of our attendees and presenters is our prime concern so, in addition to specific venue infection prevention procedures, we are doing the following:

  • Requiring that any presenter or attendee with any COVID-19 symptoms not attend the event (full refunds given, no matter how late the notice)
  • Working with venues to allow for social distancing while seated at the event
  • Providing hand sanitizer at the entrance to the presentation space
  • Following best practices for food distribution at the event
  • Monitoring and following local guidelines/mandates for infection prevention

State CE Requirements

Tennessee CE Requirements

Tennessee Board of Architectural & Engineering Examiners
(615) 741-3221
Renewal Cycle: 
Biennial
Total Hours Required: 
24
Detailed Hours Required: 
13 HSW
Renewal Deadline: 
Last day of licensee's birth month